GL1200 GOLDWINGS
HOW TO PLACE A PICTURE ON THIS SITE - Printable Version

+- GL1200 GOLDWINGS (http://www.gl1200goldwings.com/gl1200)
+-- Forum: GL1200 GOLDWINGS (http://www.gl1200goldwings.com/gl1200/forumdisplay.php?fid=4)
+--- Forum: READ HERE FIRST BEFORE DOING ANYTHING ELSE AT GL1200 GOLD WINGS (http://www.gl1200goldwings.com/gl1200/forumdisplay.php?fid=3)
+--- Thread: HOW TO PLACE A PICTURE ON THIS SITE (/showthread.php?tid=2)

Pages: 1 2 3


HOW TO PLACE A PICTURE ON THIS SITE - admin - 12-06-2006

Go here: <!-- m --><a class="postlink" href="http://www.imagecave.com/">http://www.imagecave.com/</a><!-- m --> sign up and once you have the URL of the picture you want to use come back here with the URL and then paste your link into the post and you're all set.


IMAGE CAVE IS DEAD PLEASE TRY PHOTOBUCKET INSTEAD


- admin - 12-21-2006

Use the EZCode url for best results.


- ronsena - 01-01-2007

Thanks the site works great. Cept now my pic is way to big.
I personally like it since I am going blind in my old age. but i doubt others would want to see that big of a pic of my ride.

Ron


- SIR tricky - 01-01-2007

There ya go use this one then.

[Image: otheravatar.jpg]


Having a bit of trouble with the photo - Robbin - 01-02-2007

[Image: MyWineberry84Wing.jpg]

I can't seem to get the photo to show.
Robbin


at least not in the left side like yours do! - Robbin - 01-02-2007

How do I move the photo to the left of the message box?

Robbin
[Image: MyWineberry84Wing.jpg]


- admin - 01-02-2007

That's as far left as it can go. The avatars prevent it from going left any further.


- Guest - 01-02-2007

Robbin, are you thinking along the lines of having the pic under your name like mine and alot of others now? If so it's an avatar. I've posted a thread with some information about how to do it. First you will need to resize the image to something close to 100x100.

Here is the thread with the right page loaded. Best of luck with the avatar.


- Guest - 01-02-2007

quakeholio,
All I see of yours is a red X. No picture for an avatar. Is it me or is yours not working?


- Guest - 01-02-2007

Have to watch it for a second, two smileys should come out and start playing with the x.


- admin - 01-02-2007

Stop and stare Quake's avatar and you'll see that it has 2 animated smiley faces that come and try to knock down the red X.


- Guest - 01-02-2007

I watched it for three minutes and nothing happened. Are you guyd sure about this or have you both been sharing the same crooked cigarette? :wink:


- Guest - 01-02-2007

longhaireddwb Wrote:I watched it for three minutes and nothing happened. Are you guyd sure about this or have you both been sharing the same crooked cigarette? :wink:

It's really comical. The first one comes out with a stick and starts poking it with no success and the second comes out with what looks something like a mac 10 and fills it full of holes and it finally falls down and they all retreat carrying the dreaded red x.


- admin - 01-02-2007

longhaireddwb Wrote:I watched it for three minutes and nothing happened. Are you guyd sure about this or have you both been sharing the same crooked cigarette? :wink:

Could it be possible that your computer blocks active X therefore you can't watch the little video that plays in Quakes avatar?


- Guest - 01-03-2007

I Updated active X. I didn't know anything about it before. Now I see what you guys were talking about. Also the icon are moving too. Cool.

Now sence the kid has moved away I have to do all this computer stuff myself so I got a lot of learning to do. I knew there was a reason to have him around.