Starter Removal - pics added + video

[William_86]

i had no problems installing the starter back to the bike the gear inside will stay in place, i even moved the bike parked it on the side stand and so while i was getting the starter repaired, and it remained in place. i had to remove both side of the exhausts because they are welded together in the middle so it makes long task to remove both lower fairing covers, engine guards just to get clearance for removing the exhaust. i dont know the changes on the different years of the 1200s

the bad news is that my starter failed again and ill have to do all this gain, may be the brushes i installed are getting worn really fast and the powder if doing some bad in there.. also when i inspected it, i noticed the commutator bars were worn