85 Limited and 86 SEi Trip Computer Face plates

[Guest]

For 85 Limited and 86 SEi
Good News and Bad News,

First the Good News, Yes I can get them done.

Now the bad news, will cost $55 per set + FL tax (7%), the color of the face will be a black (or teh dark broen) color, it is marine grade quality, made to use outdoors and in sunlight, will take 3-4 weeks to get them finished and I have to place an order for 125 to start. I would by them but that is a bit of money to put out. If someone out there is interested in in helping me purchase the lot please PM me.

So with that out in the open how many of you out there want some?

[Guest]

Hey Flash,
Do those have to be die cut? I know the knob holes have to be drilled but here's my thought.
I can probably get the printing done pretty cheap since I work with a lot of screen printers. Then someone (like you perhaps ) could drill the holes. The material is not that expensive and printing is pretty cheap as well. I don't have a bike that needs one so I don't know if you could sell 125 or not. if you want I'll check out the price to print. and let you know. I will need to know the actual size though.

[Guest]

Yes all the holes are die cut and the material is marine grade to withstand weather and sunlight. I know it is a thickened material for face plates, not a decal.

If you want to check to see what you can get them done for let me know.

[Guest]

I'll be happy to look into it. I need to try and find one (broken or whatever) to take to my suppliers. Might be one lying around the service dept. somewhere. I'll check around and if i can find one it will be easier to get a price. I'll let you know what i find.

[Guest]

Thanks Bill
So far I have only gotten 1 response from a member on the GWRRA site want 3 face plates and I need 2, Guess everyone else out there has good ones on theirs.
Gordon

[84wngnut]

Hey Guys what ever happened to the face plate ordeal ? Can I get one ? What's going on with that? I have been away for awhile have not heard anything Thanks