Carb sets are carb sets?
|
|
|||
Had a problem with rust recently that resulted in quite a few problems and a lot of work. I took the carbs off to clean them and ended up breaking the main jet holder. To make a long story short, I bought a set of carbs off ebay. Went through them just to be certain and they were in better shape than my old set. The set I bought was for an 86 while mine is an 87. The first thing I discovered is that the fuel line to the carbs were 3/16" while my pump is 1/4". Now to set the idle jet screws, do I set them to the year of the carbs or the year of the bike?
|
|||
#1
09-17-2010, 02:15 PM,
|
|
|||
according to info in the clymer shop manual the difference is only 1/4 turn. I'd split the difference or go with 2 turns out and do an idle drop adjustment per your service manual.
|
|||
#2
09-17-2010, 03:15 PM,
|
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
SINGLE CARB SETUPS | bruceamy71@yahoo.com | 0 | 1,945 |
04-16-2021, 07:52 PM Last Post: bruceamy71@yahoo.com |
|
Secondary Air delete on Carb | Stevensublette@gmail.com | 1 | 1,537 |
02-08-2020, 07:31 AM Last Post: mlh555444 |
|
Draining Carb Bowls with Carbs on Bike | WingMan71 | 11 | 9,055 |
01-10-2019, 01:56 PM Last Post: WingMan71 |
|
carb swap | racejunky | 2 | 2,282 |
10-20-2017, 06:05 PM Last Post: racejunky |
|
84 aspencade carb issues | tongy66086 | 2 | 2,729 |
12-29-2015, 12:21 PM Last Post: bs175dths |
|
New carb project | GrimReaper | 5 | 3,060 |
01-03-2015, 11:10 AM Last Post: wingandaprayer |
|
84 Aspencade Carb parts - starter valve actuator | insignia100 | 2 | 2,298 |
11-06-2014, 11:11 AM Last Post: bs175dths |
|
Randakk's master carb kit for GL1200's, EXCELLENT QUALITY | admin | 42 | 29,784 |
06-17-2014, 07:50 PM Last Post: pstelter |
|
Carb Rebuild | marksaunders | 12 | 5,562 |
05-17-2014, 02:24 PM Last Post: marksaunders |
|
Carb Sync | WAC1972 | 7 | 4,056 |
05-25-2013, 09:01 PM Last Post: bs175dths |
Users browsing this thread: 1 Guest(s)