Thread Rating:
  • 3 Vote(s) - 3.33 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Starter Solenoid
Tricky is slipping a little bit...

Usually whenever he gets a question like this he points the poster to the posts about removing the dogbone fuse an replacing it with a blade type.

Also look into the Stator wire posts. If your stator is gone(you can search these forums for the test procedure), you should consider a Poor Boy conversion. But make sure the stator is bad first. Make sure that is is not just a bad connector(the 3 yellow wires next to the battery....).

Anyway Good luck! Smile

PS Tricky is VERY good.... ^Smile^
Reply
#6 10-16-2011, 11:14 PM,


Messages In This Thread
Starter Solenoid - by Bigfish05 - 10-14-2011, 04:05 PM
Re: Starter Solenoid - by SIR tricky - 10-14-2011, 04:21 PM
Re: Starter Solenoid - by Bigfish05 - 10-14-2011, 04:30 PM
Re: Starter Solenoid - by SIR tricky - 10-14-2011, 07:07 PM
Re: Starter Solenoid - by Bigfish05 - 10-14-2011, 08:19 PM
Re: Starter Solenoid - by staijo - 10-16-2011, 11:14 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html