Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
slight popping at 2500 r.p,m,
Thanks everyone for the help. I brought the rpms up to 2500 where the popping/missing was happening and proceeded to spray brakekleen on different areas. When I sprayed the area around the reed valves it smoothed out. I pulled the carbs back off installed new hoses from the reed valves to the heads with new clamps and that did it. When I initially inspected them they seemed in good shape with tight connections but perhaps one got loosened up on the carb install, they do get bumped around a bit when wiggling the carbs back into place.
84 GL1200 Standard. 46k miles
79 CX500
Reply
#16 05-14-2013, 10:01 PM,
http://www.ebay.com/itm/320814274191?ssP...1423.l2649
1987 Aspencade 129K
1986 SEI 93K
2014 Tri-Glide HD 17K

Hancock,MD
Reply
#17 05-15-2013, 04:00 AM,
so now she is running good and you two are in Heart again?

Congrates!!
enjoying the view from the saddle....... due mainly to the people and information found within this site
Reply
#18 05-15-2013, 10:20 PM,


Possibly Related Threads…
Thread Author Replies Views Last Post
  Popping & spitting when throttle is open 3 1,474 08-09-2008, 10:34 AM
Last Post: William_86
  Carbs poping at around 2500 rpms 2 1,182 08-02-2008, 03:22 PM
Last Post: admin
  popping off roadawg 4 1,742 11-02-2007, 09:53 AM
Last Post: admin

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html