Thread Rating:
  • 4 Vote(s) - 2.25 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lost socket in fairing
I was fixing part of the dash on my 86 Aspencade. After putting the mounting nuts thru the lower part of the mountings, the socket fell off of the extenstion. It fell into the front of the fairing, but I can't see where it fell. After taking off the headlight and poking around other parts I could take off, I still can't see how to get to the lower part of the fairing. Any ideas on how to retrieve it? Or, would it cause a problem being left there? Confused
Reply
#1 08-25-2014, 03:11 AM,
Possibly in the section you can access by removing the pockets
The only stupid questions are the one's that are not asked.

Reply
#2 08-25-2014, 05:33 AM,
Tricky has a good idea there. I would also try an extension magnet with a strong head.
Ed (Vic) Belanger - 1954-2015
Founder of gl1200goldwings.com

Reply
#3 08-25-2014, 06:46 AM,
It will come out one day while you are riding down the highway with a police officer following you. It will go though in windshield almost hitting him in the head. He will of course have a swat team return it to you. At least this is how things go for me.
1987 Interstate
Reply
#4 08-25-2014, 11:05 AM,
(08-25-2014, 05:33 AM)SIR tricky Wrote: Possibly in the section you can access by removing the pockets

Already gave that a try. No joy. It seems to be in between the walls of the fairing. It's becoming a quest to retrieve it.

Reply
#5 08-26-2014, 01:58 PM,
Don't know why it posted 3x, I'll get the hang of this yet...
Reply
#6 08-26-2014, 05:25 PM,
I don't think it will hurt anything in there unless it rattles. Even then I would just turn the radio up.
A rainy day off beats a sunny day at work any time..................
Reply
#7 08-28-2014, 05:53 AM,
did you check your dryer in your laundry room?

-Ride On
enjoying the view from the saddle....... due mainly to the people and information found within this site
Reply
#8 09-17-2014, 08:59 AM,
Grim Reaper, did you ever locate the missing socket?
'85 GL1200 Aspencade
'07 Shadow Sabre 1100
South of Sarnia, SW Ontario, Can
Reply
#9 10-02-2014, 05:01 AM,
As a matter of fact, I finally did. Used a flashlight and one of the as seen on tv drain cleaners. I was able to bend it to reach the bottom of the fairing thru the right pocket, and it was stiff enough to hold the socket. Big Grin
Reply
#10 10-08-2014, 04:51 PM,


Forum Jump:


Users browsing this thread: 2 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html