Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Air suspension
Hi All,
A question for you about my brothers bike.
He has recently bought an '85' aspencade, it was mainly in a box but he has rebuilt it. The problem is that the reading on the suspension pressure just shows bars all the way to the top. This happens on front and rear alike. The compressor is working when you try to inflate but I'm not sure if it is releasing air when you press the decrease button.
Any ideas!!!!
Thanks in advance Paul.
Reply
#1 04-17-2008, 02:20 PM,
Possibly installed incorrectly?

Have a look at this post <!-- l --><a class="postlink-local" href="http://www.gl1200goldwings.com/viewtopic.php?f=50&t=87">viewtopic.php?f=50&t=87</a><!-- l -->

On second thoughts, undo both front and rear hoses from the pump to ensure all the air is removed, then check what the gauge is reading?

It could be an electrical problem.
The only stupid questions are the one's that are not asked.

Reply
#2 04-17-2008, 02:37 PM,


Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html