Thread Rating:
  • 3 Vote(s) - 3.67 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rear brakes
I've read on the forum that the rear brake is connected to the left front!
But on the 87 1200i that i have it is connected to the right front is this the correct setup or is it backwards, and i am sitting on the bike when i say right and left even the manual said that you bled the left front with the rear ,i've got it done
but like to know if it's setup right or did the P/O setup it up backwards. Also read that you need to change the piston when you work on the the brakes calipers each time or can you get two or three pairs of pads out of them?
Reply
#1 06-19-2012, 04:16 PM,
From the Honda 84-85 Service Manual

Brakes
Service Information

CAUTION
This motorcycle has a unified brake system which provides simultaneous braking action of the right front and rear
disc brakes when the brake pedal is operated. The hand brake lever operates the left front disc brake, which is
independent of the unified system.
The only stupid questions are the one's that are not asked.

Reply
#2 06-19-2012, 06:19 PM,


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rear brakes squeaking BigDaddy12t 5 2,131 05-07-2011, 10:09 AM
Last Post: BigDaddy12t
  rear brakes 84 7 2,475 04-22-2009, 05:12 PM
Last Post: Guest
  rear brakes scott 2 1,377 02-02-2009, 12:35 PM
Last Post: Ed Z
  Rear brakes on "87" gw 1200 aspencade sillfam 13 5,902 08-14-2007, 04:19 PM
Last Post: vrocrider
  Bleeding GL1100 rear brakes Clint Styron 2 2,128 02-04-2007, 07:39 AM
Last Post:
  Source for rear brakes 85GL1200I 5 2,650 01-22-2007, 12:02 PM
Last Post: 85GL1200I

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html