Regulator Connector - One Spade Connector Melted

[WingMan71]

3) the yellow wires from stator just hardwire,same with the black wire

Thanks to all!

Neoracer,

Your item #3 confused me just a bit. I'm not looking at the connector right now, but I beleiver there are 3 yellow wires at the regulator connector (those coming from my soldered joints at the left side battery area). You don't mean for me to connect all three of those wires do you? Those three yellow wires must remain separate from each other right? What I should do is solder one yellow wire to one at the regulator. Solder a second yellow wire to a second yellow wire at the regulator, etc. correct?

PS) BTW, it was one of the three yellow wires at the regulator connector that melted the plastic.