Re: GL1200 frame decals

[Lemen]

Has anybody found where to buy a set of frame decals for a 1200 Aspencade 1984?
I have powdercoated my frame and the old decals could do to be replaced.
The only ones I could find were for a 1983 1100 but they are different.

[Lemen]

I have tried everywhere to find these decals but no go.
I am going to get some made up.
Anyone interested in a set?

[BladeRunner]

If you could provide suitable pictures of decals you want in good condition, I'm sure any vinyl place could fire off some copies.
I had a large one made 5.5 ft.x 2 ft ( BladeRunner ) for the transom of my boat, it's been on there 4 yrs now and looks the same as the day it was put on. I'm sure they could do any size you need.

[Lemen]

Thank you for your replies.
It looks like I will have to get them made up.
Only problem is, some of the decals on my frame were beyond salvaging
and I do not have patterns to work from.

[Orignalowner]

Thank you for your replies.
It looks like I will have to get them made up.
Only problem is, some of the decals on my frame were beyond salvaging
and I do not have patterns to work from.

I think I have a complete set of frame decals, never used. Only problem is that they are in French. I will have to check to make sure I still have them. If you think that they will help, they are yours. I don't think I will ever use them.

[Lemen]

Thank you for your replies.
It looks like I will have to get them made up.
Only problem is, some of the decals on my frame were beyond salvaging
and I do not have patterns to work from.

I think I have a complete set of frame decals, never used. Only problem is that they are in French. I will have to check to make sure I still have them. If you think that they will help, they are yours. I don't think I will ever use them.

Wow! I will gladly buy these from you if you can find them. I would use these as patterns
to get some made, so being in french would not be a problem.

[Orignalowner]

Success yes looks like they are all here, even the metal plate that goes to the compressor outlets. Only one possible problem: the impending doom of a postal strike. From what I have read the postal union has given 72 hour notice, after which they are in legal strike position. I don't know if you are in a rush, let me know what you want to do. pm your email and mailing address and we'll go from there.

[judd9571]

Lemen,

All my frame decals are mint and I'd be glad to take photos and measurments if you'd like.

-Matt-

[judd9571]

Lemen,

All my frame decals are mint and I'd be glad to take photos and measurments if you'd like.

-Matt-

[Lemen]

Success yes looks like they are all here, even the metal plate that goes to the compressor outlets. Only one possible problem: the impending doom of a postal strike. From what I have read the postal union has given 72 hour notice, after which they are in legal strike position. I don't know if you are in a rush, let me know what you want to do. pm your email and mailing address and we'll go from there.

My apologies for not responding sooner. I would be interested in purchasing these decals from you.
I will PM you my email address.

[Lemen]

Lemen,

All my frame decals are mint and I'd be glad to take photos and measurments if you'd like.

-Matt-

Matt
Thank you for your generous offer.
I will PM you with my email